cost for pressure treated deck

Wood Decking Boards This Doug fir decking is pressure treated in order to protect it from termites fungal decay Local store prices may vary from those

Get Quotes

Pressure treated wood such as southern yellow pine, which has been chemically processed to resist rot and insects, runs from $8 to $20 per square foot, says Ralph Ford, owner of Deckmasters in Greenwood, Indiana.

Get Quotes

A low-budget deck is made of pressure-treated wood, cedar or redwood. The design will be a simple square or rectangle without any curves or patterns in the boards. It will often last 10 to 20 years, depending on the materials used and on how well the deck is maintained.

Get Quotes

Add a 16-by-20-foot deck using pressure-treated joists What is the Cost to Build a Deck? What is the Cost to Build a Deck? Average Costs for Building a Deck ;

Get Quotes

The costs for the project will include: Materials - the deck described would require pressure treated joists, 4"x4" pressure treated posts, pressure treated decking installed in a basic linear array, and appropriate galvanized screws (usually around 15 pounds) to complete construction;

Get Quotes

Routinely staining your deck will help protect your deck but it is not uncommon for pressure treated decking to split, crack, warp, and turn gray in a few years. Cedar and redwood decking prices range from about $1.25 to $2.00 per linear foot for 5/4x6 stock.

Get Quotes

Pressure Treated Lumber. Sort By: Pressure Treated Natural Wood Decking (2) Pressure Treated Timber Local store prices may vary from those displayed.

Get Quotes

Scroll down to check out our pressure treated deck framing prices! AdvantageLumber.com Treated Wood Information Advantage Lumber sells MCA (Micronized Copper Azole) treated wood in all of our locations, except the West Coast. The West Coast location offers ACQ (Alkaline Copper Quaternary) treated wood.

Get Quotes

Lumber prices can change daily, affecting the total cost. CostHelper readers report paying $1,800-$8,500 to have a handyman or casual labor install a pressure-treated wood deck, or $8-$23 per square foot. Readers who hired a decking contractor report paying $4,400-$20,000, or $16-$50 per square foot.

Get Quotes

[Prices updated 5-22-03] Just put in the area of your new deck in square feet and zero (0) if you want no stairs. If you want stairs, put in the height in inches from the door threshold to the ground where the stairs will be located.

Get Quotes

Let’s take a look at pressure treated lumber deck prices for the material, installation and repairs. Lumber prices fluctuate on a yearly and sometimes seasonal basis. With that in mind, here are current pressure treated decking costs:

Get Quotes

Each year approximately 75 percent of all new decks are covered with pressure-treated (PT) decking. The understructure frame—posts, beams, joists—of virtually every deck is made of PT lumber. PT decking is the most affordable and widely available material. The most common size of treated decking is 5/4 x 6 inch planks (about 80 cents per linear foot), but 2 x 6s (70 cents per linear foot) and 2 x 4s (50 cents per linear foot) are also used.

Get Quotes

A new deck is a substantial investment to home and property. It is important to know and understand the overall costs of decking materials prior to a project so the

Get Quotes

Pressure Treated DecksMaterials Cost Standard deck $5.00 Sq/Ft Standard Stairs $7.00 Sq/Ft Standard Railings IMAGE. Deck and Fence A FULL SERVICE DECK AND FENCE COMPANY. Image Deck and Fence

Get Quotes

Pressure Treated Deck Pricing and Installation Cost Checklist Get at least 3-5 estimates before hiring a Pressure Treated Deck contractor — estimates are typically free, unless it’s a service call for a repair.

Get Quotes

On average, a pressure-treated wood deck will cost between $15 to $25 per square foot including installation. A cedar wood deck will cost $30 or more per square foot. A composite deck will cost $30 to $45 per square foot installed.

Get Quotes

Shop for decking at Lowes. Low prices on treated lumber, Decking & Porches. Choose from various decking materials like pressure-treated lumber, deck tiles,

Get Quotes

Use our treated timbers for retention walls, fence supports, deck supports, beams, or girders, and use our treated boards for trim and finish work. We have a selection of treated plywood for a variety of uses.

Get Quotes

Pressure Treated Lumber Deck Cost and Price Guide, including costs for installing pressure treated wood decking & repair prices per square foot.

Get Quotes

Average cost to build a deck is about $10,630 Materials - the deck described would require pressure treated joists, Fixr.com provides cost guides,

Get Quotes

Species & Sizes Of Pressure Treated Wood. Treated wood is generally available as dimensional stock in 2x4’s, 2x6’s, 4x4’x, and 2x2’s for rail components. 5/4x6’s and 2x6’s for decking. 2x8’s, 2x10’s, 2x12’s for joists, stair stringers, and beams. 6x6’s for support posts. Also plywood.

Get Quotes

Product Details

Product List