how to build a cement deck blocks

A deck pier block is in many ways just a simplified version of a “precast foundation”, a foundation type recognized by building codes. They're subject to all ... While pier blocks commonly have protruding concrete lugs that surround the post, there is only opinion as to whether they are of sufficient strength. The small bearing ...

Get Quotes

As a building inspector, I see a lot of decks that aren't built to code — despite the plan review process, the purpose of which is to identify any code issues before ... No holes need to be dug for footings, as the precast blocks are set on grade, and the posts or beams fit in pockets cast in the concrete block.

Get Quotes

One way to build a ground level deck with simple construction, without breaking the bank, is to use prefabricated deck blocks for your foundation. ... Measure and cut 1 1 4 by 6 inch decking boards to fit parallel to the side rim joists, so that the ends of the decking boards are flush with the outside faces of the ...

Get Quotes

Anchoring screws; Bags of pre-mixed concrete (or 18 concrete patio slabs); Cylindrical forms (Sonotubes ) or 4" deck blocks if using patio stones; Galvanized 4" post saddles (if using concrete); Carriage bolts, nuts and washers; Galvanized joist hangers and brackets; Galvanized screws and nails; Lag screws and washers ...

Get Quotes

DIY Floating Deck Plans - Rogue Engineer 4. Now we placed our 4×4 posts in the deck blocks and marked them with a laser level 18″ (9-1 4″ for beams 7-1 4″ for joists 1″ for decking 1 2″ for good luck) below where we wanted the top of our deck to be. Then, we headed over to the saw and cut ...

Get Quotes

Step 2: Foundation Blocks Layout. Picture of Foundation Blocks Layout. The main area of my deck is just a little bigger than a 12-foot by 8-foot rectangle. This worked out well for material usage and produced very little waste. I began by laying out cement blocks in a 4-foot grid, and spray painted around ...

Get Quotes

Product Details

Product List